You are editing:
/usr1/www/Optics/html/components/CP_03.txt
# ************************************************************* # # Component: CP_03 # # Enter data or descriptions for any of the parameters in the # DATA PARAMETERS section below. # Type on the same line as the parameter, leaving 1 or more # spaces between the parameter name and your text. # # Quotes are not required. # # You may include comment lines, beginning with the character # "#", anywhere you like. # # You may include simple html tags (i.e.
to insert a # line break) to format your content, but all content must # be on ONE LINE. # # All values do not need to be populated, but the parameter # names should NOT BE CHANGED OR DELETED! # ************************************************************* #-------------------------------------------------------------- # Units "Cheat sheet": # # optic-type: any one of these: # ITM ETM CP ERM FM BS PRM F-PRM PR2 # F-PR2 PR3 F-PR3 SRM F-SRM SR2 F-SR2 SR3 # IMCC IMCF # # sn: integer # ROC: meters (floating point number) # figure: nm rms (floating point number) # thickness (max): mm (floating point number) # diameter: mm (floating point number) # mass: grams (floating point number) # wedge: degrees (floating point number) # vendor-polish: DCC Number(s) # vendor-coating: DCC Number(s) # vendor-substrate: DCC Number(s) # scatter: ppm (floating point number) *and/or* DCC Number(s) # absorption: ppm (floating point number) *and/or* DCC Number(s) # HR: ppm (floating point number) *and/or* DCC Number(s) # AR: ppm (floating point number) *and/or* DCC Number(s) # drawings: DCC Number(s) # notes: freeform text # status: freeform text # location: freeform text # # IMPORTANT - # Measurements should include tolerance! # #-------------------------------------------------------------- # # DATA PARAMETERS # optic-type CP sn 03 ROC 64,860-v figure 0.15-v thickness 100.03-v diameter 340.13 mass wedge 0.074-v vendor-polish C1000451 vendor-coating C1103219 vendor-substrate E1000798 scatter X absorption S1: 0.55
S2: 0.57 HR X AR S1: 67
S2: 15 drawings D1000979
E1400394 notes Custom Lens
bonded/soldered as CP-Y
remove for O5 status location LLO-Y # These two are the rightmost "hinting" columns optic-typeX CP snX 03 # FIRST POLISH - repolished March 2015 # optic-type CP # sn 03 # ROC 1483100 # figure 0.16 # thickness 100.25 # diameter 340.13 # mass 19996 # wedge 0.07 # vendor-polish C1000451 # vendor-coating C1103219 # vendor-substrate E1000798 # scatter X # absorption X # HR X # AR X # drawings D1000979 # notes Not A Spare # status Coating failed, excess absorption # location CIT # These two are the rightmost "hinting" columns # optic-typeX CP # snX 03