You are editing:
/usr1/www/Optics/html/components/ETM_05.txt
# ************************************************************* # # Component: ETM_05 # # Enter data or descriptions for any of the parameters in the # DATA PARAMETERS section below. # Type on the same line as the parameter, leaving 1 or more # spaces between the parameter name and your text. # # Quotes are not required. # # You may include comment lines, beginning with the character # "#", anywhere you like. # # You may include simple html tags (i.e.
to insert a # line break) to format your content, but all content must # be on ONE LINE. # # All values do not need to be populated, but the parameter # names should NOT BE CHANGED OR DELETED! # ************************************************************* # -------------------------------------------------------------- # Units "Cheat sheet": # # optic-type: any one of these: # ITM ETM CP ERM FM BS PRM F-PRM PR2 # F-PR2 PR3 F-PR3 SRM F-SRM SR2 F-SR2 SR3 # IMCC IMCF # # sn: integer # ROC: meters (floating point number) # figure: nm rms (floating point number) # thickness (max): mm (floating point number) # diameter: mm (floating point number) # mass: grams (floating point number) # wedge: degrees (floating point number) # vendor-polish: DCC Number(s) # vendor-coating: DCC Number(s) # vendor-substrate: DCC Number(s) # scatter: ppm (floating point number) *and/or* DCC Number(s) # absorption: ppm (floating point number) *and/or* DCC Number(s) # HR: ppm (floating point number) *and/or* DCC Number(s) # AR: ppm (floating point number) *and/or* DCC Number(s) # drawings: DCC Number(s) # notes: freeform text # status: freeform text # location: freeform text # # IMPORTANT - # Measurements should include tolerance! # #-------------------------------------------------------------- # # DATA PARAMETERS # optic-type ETM sn 05 ROC 2248 figure 1.05 thickness diameter 340.14 mass wedge vendor-polish C1000483 vendor-coating vendor-substrate E1000779 scatter absorption HR AR drawings D080658 notes repolished 2021 status red Unc. 7980 location CIT # These two are the rightmost "hinting" columns optic-typeX ETM snX 05 # # # # -v1, before repolish of both sides # optic-type ETM # sn 05 # ROC 2250.02 # figure 0.11 # thickness 200.41 # diameter 340.14 # mass # wedge 0.07 # vendor-polish C1000483 # vendor-coating C1103231 # vendor-substrate E1000779 # scatter # absorption # HR # AR # drawings D080658 # notes S1 ITM HR
S2 unc
unannealed
# status red ROC figure # location Zygo EPO # These two are the rightmost "hinting" columns # optic-typeX ETM # snX 05