You are editing:
/usr1/www/Optics/html/components/ETM_08.txt
# ************************************************************* # # Component: ETM_08 # # Enter data or descriptions for any of the parameters in the # DATA PARAMETERS section below. # Type on the same line as the parameter, leaving 1 or more # spaces between the parameter name and your text. # # Quotes are not required. # # You may include comment lines, beginning with the character # "#", anywhere you like. # # You may include simple html tags (i.e. <br> to insert a # line break) to format your content, but all content must # be on ONE LINE. # # All values do not need to be populated, but the parameter # names should NOT BE CHANGED OR DELETED! # ************************************************************* #-------------------------------------------------------------- # Units "Cheat sheet": # # optic-type: any one of these: # ITM ETM CP ERM FM BS PRM F-PRM PR2 # F-PR2 PR3 F-PR3 SRM F-SRM SR2 F-SR2 SR3 # IMCC IMCF # # sn: integer # ROC: meters (floating point number) # figure: nm rms (floating point number) # thickness (max): mm (floating point number) # diameter: mm (floating point number) # mass: grams (floating point number) # wedge: degrees (floating point number) # vendor-polish: DCC Number(s) # vendor-coating: DCC Number(s) # vendor-substrate: DCC Number(s) # scatter: ppm (floating point number) *and/or* DCC Number(s) # absorption: ppm (floating point number) *and/or* DCC Number(s) # HR: ppm (floating point number) *and/or* DCC Number(s) # AR: ppm (floating point number) *and/or* DCC Number(s) # drawings: DCC Number(s) # notes: freeform text # status: freeform text # location: freeform text # # IMPORTANT - # Measurements should include tolerance! # #-------------------------------------------------------------- # # DATA PARAMETERS # optic-type ETM sn 08 ROC 2240 figure 0.63 thickness 200.12 diameter 340.18 mass 39,621 w/ears -LHO wedge 0.074 vendor-polish C1000486 vendor-coating C1103233 vendor-substrate E1000782 scatter 7.4 absorption 0.32 HR 7.1 AR 2,300 drawings D080658 notes 2 PA ~ 5 µm status yellow AR Reflectivity location LLOx # These two are the rightmost "hinting" columns optic-typeX ETM snX 08 # History # H1-ETMx during aLIGO O1&O2 coating mask 1 # # optic-type ETM # sn 08 # ROC 2241.54 # figure 0.73 # thickness 199.75 # diameter 340.13 # mass 39603 # wedge 0.08 # vendor-polish C1000486 # vendor-coating C1103233 # vendor-substrate E1000782 # scatter 8.0 -L # absorption 0.3 -L # HR 3.6 ppm -L # AR 820 ppm -L # drawings D080658 # notes # status Repolish S1 # location Richmond # These two are the rightmost "hinting" columns # optic-typeX ETM # snX 08 # History # H1-ETMx during aLIGO O1&O2 coating mask 1