You are editing:
/usr1/www/Optics/html/components/ETM_12.txt
# ************************************************************* # # Component: ETM_12 # # Enter data or descriptions for any of the parameters in the # DATA PARAMETERS section below. # Type on the same line as the parameter, leaving 1 or more # spaces between the parameter name and your text. # # Quotes are not required. # # You may include comment lines, beginning with the character # "#", anywhere you like. # # You may include simple html tags (i.e. <br> to insert a # line break) to format your content, but all content must # be on ONE LINE. # # All values do not need to be populated, but the parameter # names should NOT BE CHANGED OR DELETED! # ************************************************************* #-------------------------------------------------------------- # Units "Cheat sheet": # # optic-type: any one of these: # ITM ETM CP ERM FM BS PRM F-PRM PR2 # F-PR2 PR3 F-PR3 SRM F-SRM SR2 F-SR2 SR3 # IMCC IMCF # # sn: integer # ROC: meters (floating point number) # figure: nm rms (floating point number) # thickness (max): mm (floating point number) # diameter: mm (floating point number) # mass: grams (floating point number) # wedge: degrees (floating point number) # vendor-polish: DCC Number(s) # vendor-coating: DCC Number(s) # vendor-substrate: DCC Number(s) # scatter: ppm (floating point number) *and/or* DCC Number(s) # absorption: ppm (floating point number) *and/or* DCC Number(s) # HR: ppm (floating point number) *and/or* DCC Number(s) # AR: ppm (floating point number) *and/or* DCC Number(s) # drawings: DCC Number(s) # notes: freeform text # status: freeform text # location: freeform text # # IMPORTANT - # Measurements should include tolerance! # #-------------------------------------------------------------- # # DATA PARAMETERS # optic-type ETM sn 12 ROC 2240 figure 0.20 thickness diameter 340.156-v mass wedge vendor-polish C1106292 vendor-coating C1103237 vendor-substrate E1100881 scatter absorption HR AR 1872 drawings D080658 notes status yellow AR reflectivity location LHO # These two are the rightmost "hinting" columns optic-typeX ETM snX 12 # History~~~~~for first polish/coat~~~~~~~~~~~~~~~~~~~~ # Ears bonded Sept 21/22,13 # H1-ETMy during aLIGO O1&O2 coating mask 1 # thickness 199.725-v # diameter 340.156-v # mass 39,597-v 39,623-L w/ears # wedge 0.076-v # vendor-polish C1106292 # vendor-coating C1103237 # vendor-substrate E1100881 # scatter 8.8 -L # absorption 0.4 -L # HR 3.6 ppm -L # AR 830 ppm -L