You are editing:
/usr1/www/Optics/html/components/ETM_14.txt
# ************************************************************* # # Component: ETM_14 # # Enter data or descriptions for any of the parameters in the # DATA PARAMETERS section below. # Type on the same line as the parameter, leaving 1 or more # spaces between the parameter name and your text. # # Quotes are not required. # # You may include comment lines, beginning with the character # "#", anywhere you like. # # You may include simple html tags (i.e.
to insert a # line break) to format your content, but all content must # be on ONE LINE. # # All values do not need to be populated, but the parameter # names should NOT BE CHANGED OR DELETED! # ************************************************************* #-------------------------------------------------------------- # Units "Cheat sheet": # # optic-type: any one of these: # ITM ETM CP ERM FM BS PRM F-PRM PR2 # F-PR2 PR3 F-PR3 SRM F-SRM SR2 F-SR2 SR3 # IMCC IMCF # # sn: integer # ROC: meters (floating point number) # figure: nm rms (floating point number) # thickness (max): mm (floating point number) # diameter: mm (floating point number) # mass: grams (floating point number) # wedge: degrees (floating point number) # vendor-polish: DCC Number(s) # vendor-coating: DCC Number(s) # vendor-substrate: DCC Number(s) # scatter: ppm (floating point number) *and/or* DCC Number(s) # absorption: ppm (floating point number) *and/or* DCC Number(s) # HR: ppm (floating point number) *and/or* DCC Number(s) # AR: ppm (floating point number) *and/or* DCC Number(s) # drawings: DCC Number(s) # notes: freeform text # status: freeform text # location: freeform text # # IMPORTANT - # Measurements should include tolerance! # #-------------------------------------------------------------- # # DATA PARAMETERS # optic-type ETM sn 14 ROC figure thickness diameter 340.234 mass wedge vendor-polish C2200073 vendor-coating vendor-substrate aLIGO E1100883 A+ E2200155 scatter absorption HR AR drawings D080658 notes status location CIT # These two are the rightmost "hinting" columns optic-typeX ETM snX 14 # # --------------------------------------------- # HISTORY - ALIGO # optic-type ETM # sn 14 # ROC 2250.99 +/- 0.5 # figure 0.10-v # thickness 199.885 # diameter 340.234 # mass 39633 # wedge 0.07 # vendor-polish C1106294 # vendor-coating C1103239 # vendor-substrate aLIGO E1100883 A+ E2200155 # scatter 18 and changing # absorption 0.2 -L # HR 4.5 ppm -L # AR 114 ppm - v # drawings D080658 # notes Coat with ETM11 mask 2 # status # location Zygo # These two are the rightmost "hinting" columns # optic-typeX ETM # snX 14