You are editing:
/usr1/www/Optics/html/components/ETM_15.txt
# ************************************************************* # # Component: ETM_15 # # Enter data or descriptions for any of the parameters in the # DATA PARAMETERS section below. # Type on the same line as the parameter, leaving 1 or more # spaces between the parameter name and your text. # # Quotes are not required. # # You may include comment lines, beginning with the character # "#", anywhere you like. # # You may include simple html tags (i.e. <br> to insert a # line break) to format your content, but all content must # be on ONE LINE. # # All values do not need to be populated, but the parameter # names should NOT BE CHANGED OR DELETED! # ************************************************************* #-------------------------------------------------------------- # Units "Cheat sheet": # # optic-type: any one of these: # ITM ETM CP ERM FM BS PRM F-PRM PR2 # F-PR2 PR3 F-PR3 SRM F-SRM SR2 F-SR2 SR3 # IMCC IMCF # # sn: integer # ROC: meters (floating point number) # figure: nm rms (floating point number) # thickness (max): mm (floating point number) # diameter: mm (floating point number) # mass: grams (floating point number) # wedge: degrees (floating point number) # vendor-polish: DCC Number(s) # vendor-coating: DCC Number(s) # vendor-substrate: DCC Number(s) # scatter: ppm (floating point number) *and/or* DCC Number(s) # absorption: ppm (floating point number) *and/or* DCC Number(s) # HR: ppm (floating point number) *and/or* DCC Number(s) # AR: ppm (floating point number) *and/or* DCC Number(s) # drawings: DCC Number(s) # notes: freeform text # status: freeform text # location: freeform text # # IMPORTANT - # Measurements should include tolerance! # #-------------------------------------------------------------- # # DATA PARAMETERS # optic-type ETM sn 15 ROC 2245.4 figure 0.64 thickness 200.35-v diameter 340.16-v mass 39642-v 39669 w/ears wedge 0.07-v vendor-polish C1106295 vendor-coating C1103240 vendor-substrate E1100884 scatter 9.1 -L absorption 0.21-L HR 3.9 ppm -L AR 1.6 ppm-v drawings D080658 notes 10/15 coating pair mask 3 status S3 ear bond anomaly E1800204 installed after O2 location Coastline # These two are the rightmost "hinting" columns optic-typeX ETM snX 15 ################ # History # S3 ear bond anomaly E1800204 # Was LLO ETMy for the duration of O3 installed after O2 # Removed after O3 for point absorber re-work of S1