You are editing:
/usr1/www/Optics/html/components/IMCC_02.txt
# ************************************************************* # # Component: IMCC_02 # # Enter data or descriptions for any of the parameters in the # DATA PARAMETERS section below. # Type on the same line as the parameter, leaving 1 or more # spaces between the parameter name and your text. # # Quotes are not required. # # You may include comment lines, beginning with the character # "#", anywhere you like. # # You may include simple html tags (i.e.
to insert a # line break) to format your content, but all content must # be on ONE LINE. # # All values do not need to be populated, but the parameter # names should NOT BE CHANGED OR DELETED! # ************************************************************* #-------------------------------------------------------------- # Units "Cheat sheet": # # optic-type: any one of these: # ITM ETM CP ERM FM BS PRM F-PRM PR2 # F-PR2 PR3 F-PR3 SRM F-SRM SR2 F-SR2 SR3 # IMCC IMCF # # sn: integer # ROC: meters (floating point number) # figure: nm rms (floating point number) # thickness (max): mm (floating point number) # diameter: mm (floating point number) # mass: grams (floating point number) # wedge: degrees (floating point number) # vendor-polish: DCC Number(s) # vendor-coating: DCC Number(s) # vendor-substrate: DCC Number(s) # scatter: ppm (floating point number) *and/or* DCC Number(s) # absorption: ppm (floating point number) *and/or* DCC Number(s) # HR: ppm (floating point number) *and/or* DCC Number(s) # AR: ppm (floating point number) *and/or* DCC Number(s) # drawings: DCC Number(s) # notes: freeform text # status: freeform text # location: freeform text # # IMPORTANT - # Measurements should include tolerance! # #-------------------------------------------------------------- # # DATA PARAMETERS # optic-type IMCC sn 02 ROC 27.275-v figure 1.09-v 1.35-L thickness 74.71 v diameter 150.76 v mass 2906 L wedge 29.2 arcmin v vendor-polish C1002147 vendor-coating C1102170 vendor-substrate E1100916 scatter 9 -L absorption HR-0.3 L HR 3-v, 5.1-L ppm AR 251ppm v drawings D070092 notes install as MC2 in HAM3 H1 status location LHO # These two are the rightmost "hinting" columns optic-typeX IMCC snX 02