You are editing:
/usr1/www/Optics/html/components/ITM_10.txt
# ************************************************************* # # Component: ITM_10 # # Enter data or descriptions for any of the parameters in the # DATA PARAMETERS section below. # Type on the same line as the parameter, leaving 1 or more # spaces between the parameter name and your text. # # Quotes are not required. # # You may include comment lines, beginning with the character # "#", anywhere you like. # # You may include simple html tags (i.e.
to insert a # line break) to format your content, but all content must # be on ONE LINE. # # All values do not need to be populated, but the parameter # names should NOT BE CHANGED OR DELETED! # ************************************************************* #-------------------------------------------------------------- # Units "Cheat sheet": # # optic-type: any one of these: # ITM ETM CP ERM FM BS PRM F-PRM PR2 # F-PR2 PR3 F-PR3 SRM F-SRM SR2 F-SR2 SR3 # IMCC IMCF # # sn: integer # ROC: meters (floating point number) # figure: nm rms (floating point number) # thickness (max): mm (floating point number) # diameter: mm (floating point number) # mass: grams (floating point number) # wedge: degrees (floating point number) # vendor-polish: DCC Number(s) # vendor-coating: DCC Number(s) # vendor-substrate: DCC Number(s) # scatter: ppm (floating point number) *and/or* DCC Number(s) # absorption: ppm (floating point number) *and/or* DCC Number(s) # HR: ppm (floating point number) *and/or* DCC Number(s) # AR: ppm (floating point number) *and/or* DCC Number(s) # drawings: DCC Number(s) # notes: freeform text # status: freeform text # location: freeform text # # IMPORTANT - # Measurements should include tolerance! # #-------------------------------------------------------------- # # DATA PARAMETERS # optic-type ITM sn 10 ROC 1934.8 unc figure 0.18 unc thickness 200.12 diameter 340.13 mass wedge 0.08 vendor-polish C2200012 vendor-coating vendor-substrate aLIGO E1000773
A+ E2200150 scatter absorption HR, AR HR AR drawings D080657 notes status uncoated location CIT # These two are the rightmost "hinting" columns optic-typeX ITM snX 10 # History # optic-type ITM # sn 10 # ROC 1939.2-L # figure 0.45-L # thickness 199.90 # diameter 340.13 # mass 39631 # wedge 0.08 # vendor-polish C1000478 # vendor-coating C1103264 # vendor-substrate aLIGO E1000773
A+ E2200152 # scatter 14 -L # absorption HR 0.5 -L, AR 1.1 -L # HR 1.38 -L # AR 52 -L # drawings D080657 # notes coat with 05, mask 2 C14055 # status # location CIT # These two are the rightmost "hinting" columns # optic-typeX ITM # snX 10