You are editing:
/usr1/www/Optics/html/components/SRM_01.txt
# ************************************************************* # # Component: SRM_01 # # Enter data or descriptions for any of the parameters in the # DATA PARAMETERS section below. # Type on the same line as the parameter, leaving 1 or more # spaces between the parameter name and your text. # # Quotes are not required. # # You may include comment lines, beginning with the character # "#", anywhere you like. # # You may include simple html tags (i.e.
to insert a # line break) to format your content, but all content must # be on ONE LINE. # # All values do not need to be populated, but the parameter # names should NOT BE CHANGED OR DELETED! # ************************************************************* #-------------------------------------------------------------- # Units "Cheat sheet": # # optic-type: any one of these: # ITM ETM CP ERM FM BS PRM F-PRM PR2 # F-PR2 PR3 F-PR3 SRM F-SRM SR2 F-SR2 SR3 # # sn: integer # ROC: meters (floating point number) # figure: nm rms (floating point number) # thickness: mm (floating point number) # diameter: mm (floating point number) # mass: grams (floating point number) # wedge: degrees (floating point number) # vendor-polish: DCC Number(s) # vendor-coating: DCC Number(s) # vendor-substrate: DCC Number(s) # scatter: ppm (floating point number) *or* DCC Number(s) # absorption: ppm (floating point number) *or* DCC Number(s) # HR: ppm (floating point number) *or* DCC Number(s) # AR: ppm (floating point number) *or* DCC Number(s) # drawings: DCC Number(s) # notes: freeform text # status: freeform text # location: freeform text #-------------------------------------------------------------- # # DATA PARAMETERS # optic-type SRM sn 01 ROC figure thickness 74.9 v diameter 150.85 v mass 2899 L wedge vendor-polish C1101821 vendor-coating C1102119 vendor-substrate E1100931 scatter 10.1 -L absorption HR 0.5 -L HR 19.389% v, 20.6% -L AR 63ppm v drawings D0901174 notes status no prisms location LLO optic-typeX SRM snX 01